• Hand cut
    		•
  • Die Cut
    		•
  • Water / Laser Jet
    		•
  • All Materials as per Requirements
    		•   
     
  • W-Winding
  • SW-Winding w/ Outer Guide
  • SWi-Winding w/ Inner & Outer Guide Ring®
    		•
  • 923 - Double Jacket
  • 942 - Camprofile
  • Available in all Metals and Fillers
    		•
     
  • Mild Steel
  • Stainless Steel 304/316
  • R - style
    		•
  • RX - style
  • BX - style
  • Rubber Covered
    		•
     
  • Type D (Phenolic RTJ)
  • Type E (Full Face)
  • Type F (Ring)
    		•
  • Type FN Kits (Neo-Face Phenolic)
  • LineBacker®   G10/Viton
  • Trojan®
    		•
     
  • NBR, Aramid, NA1001-NA1081
  • NBR, Aramid w/ Wire, NA1000M
  • NBR, Carbon, NA1100
    		•
  • SBR, Aramid NA1020-NA1080
  • CR, Aramid, NA1076
  • Plant Fiber, Brown Paper, Felt
    		•
     
  • Tealon®
      1570 BLUE
      1580 OFF-WHITE
      1590 FAWN
    		•
  • 100% Expanded PTFE
    (Sheet, Tape, & Joint Sealant)


    • Teflon® and Tealon® is a Registerd Trademark of E.I. Dupont
     
  • FG - Homogenous
  • FGF - 316 Foil Insserted Sheet
    		•
  • FGT - 316 Tang Inserted Sheet
  • Graphite Tapes
    		•
     
  • JAMPAK®
  • Natural and Synthetic Fiber
  • PTFE Packing
  • EG@G & GFO™ Packing
  • Kevlar/Aramed Packing
    		•
  • Carbon, Graphite, and High Temperature Valve Stem Packing
  • Puller, Hooks, Tampers and Acc.
  • Die-Formed
  • Mechanical Seals
    		•
     
  • Neoprene
  • Red Rubber
  • Hypalon
  • Nitrile
  • EPDM
    		•
  • Pure Gum
  • Silicone
  • Viton®
  • Cloth Inserted
  • Diaphragm
    		•
  • Tank Door
  • Chimelap
  • Fillet
  • Sponge
  • Cork
    		•
     
  • Welding Blankets   (ThermoCarbon™)
  • Insulating Wool & Sheets
    		•
  • Fiberglass   (Tape, Drop warp, Rope and Tadpole)
  • Ceramic
    		•
     
  • Stop It™ Pipe Wrap
  • Teflon Thread Tape
  • Gauge Glass - Red Line, Clear, Acrylic Brushes, Washers, Wheeler Cutter and Assemblies
  • Stainless Steel Ball Valves
  • Boiler Products, Gaskets & Valves
    		•
  • Fasteners - Stud/Nuts
      (B7, B7M, L7, L7M)
  • Anodes - Aluminum, Zinc
  • Plastic Shim Stock
  • Seals, O-Rings etc.
  • Adsorbent Materials
  • Gaskets Cutters & Parts
    		•
     
  • Packing Recommendations
  • Gasket Recommendations
  • Bolt Torque Calculations
    		•
  • On-Site Surveys
  • Industrial Gasket Hand Book
  • 24 Hour Service
    		•